Programming Instructions

Programming screen « SETTINGS » Page 55/78
General programming instructions
6) Menu « Settings » - « TANK LEVEL » [0621]
« TANK LEVEL » menu will allow you to adjust threshold settings of the Tank level.
Press to open following screen.
Tank level menu will be accessible if an analog inputs in mode volume is set [4231] or active and set a
“compute enabled” in a relay setting [2531].
 Measure low level threshold 2 l
- Enter the low level threshold value. Here the value is (2).
Press to open the numeric keyboard and enter the desired value
 Compute low level threshold 10 l
- Enter the low level threshold value. Here the value is (10).
Press to open the numeric keyboard and enter the desired value
TANK LEVEL
TANK LEVEL THRESHOLD SETTINGS
FO1 Biocide A AI2 FO2 Biocide B DI3
FO3 Inhibitor AI1 FO4
Measure low level threshold
Measure low level threshold
Measure low level threshold
Measure low level threshold
Compute low level threshold Compute low level threshold
Compute low level threshold Compute low level threshold
2
10
15
l
l l
l
l l
l