Programming Instructions

SYCLOPE ODITOUCH setting Page 23/40
Communication programming instructions
 Automatic time setting
- If this option is activated, your regulator will regularly check the time on the internet using the
SNTP protocol. So, your regulator must be connected and have internet access.
 Customize SNTP server #1
- Your regulator already has an SNTP server address. You can however customize the servers
used for the setting and enter the first address here.
 Customize SNTP server #2
- When setting if server #1 cannot be reached, your regulator will make an attempt to this
second server if the box is checked and the address is entered.
ii. Web page
Enter, in the search bar of your browser, the IP address of your regulator, which you will find in the
communication information, followed by the port number you entered above (ex: 10.10.1.2:8080) to
display the web page below.
The web page above will include the main information of your regulator (Date, time, operating
status, windows of the different parameters filled in, etc.)
pH (pH) ORP (mV) Free Chlorine (ppm)
7.00
600
1.95
Setpoint : OFF Setpoint : OFF Setpoint : 2.00 ppm
8.50 pH 850 mV 9.00 ppm
6.80 pH 500 mV 1.00 ppm