Programming Instructions

Generality Page 7/40
Communication programming instructions
5) Storage and transport
It is important to store and to transport the SYCLOPE ODITOUCH controller in its original
packaging in order to minimize risk of damage.
Furthermore, the package must be stored in an environment that is protected against humidity
and exposure to chemical products.
Environmental conditions for transport and storage:
Temperature: -10 °C à 70 °C
Air humidity: Maximum of 90% with no condensation
6) Packaging
The device is delivered without power cable.
Caps of the box are pre-drilled and fitted with corresponding cable glands conform to the
maintenance of IP65 protection. Cables used must be adapted to them in order to respect the
proction index.
Shielded cables for connecting pH and ORP electrodes are not supplied.
The controller is delivered with :
 SYCLOPE ODITouch
®
central analyser/controller
 Installation and starting instructions
 General programming instructions
 Communication programming instructions (Option)
7) Warranty
The warranty is provided according to the terms of our general conditions of sale and delivery as
long as the following conditions are met:
 Use of the equipment according to the instructions of this notice
 No modifications of the equipment which may modify its behaviour and no incorrect
manipulation
 Respect for the electrical safety conditions
Consumable material is no longer covered by warranty as soon as it’s put into service.