Installation Instructions

Installation and connections Page 18/67
Installation and starting instructions
7) Changing the internal fuse of PO1 and PO2 outputs
SYCLOPE ODITouch
®
has a spare fuse located in position F5, which allows you yo quickly
replace a fuse if necessary. If you are led to using it, don’t forget to replace it…
Cut off the power supply, before changing the fuse!
Always use a fuse identical to the original one. Don’t replace with a higher intensity!
 Cut off the power supply
 Open the transparent door and unscrew the 4 front screws using an appropriate
screwdriver.
 Carefully disconnect the connection flat cable connecting the bottom card and the upper
part of the device.
Fuse F2 (TR5)
Fuse F3 (TR5)
Spare fuse F5 TR5