Installation Instructions

Input mode Page 47/67
Installation and starting instructions
 « Controlling » area in the case of an input Volume
List of controlling threshold
Dosing stop threshold button : Used to change the dosing stop
threshold.
o « Dosing stop threshold » button
 « Calibration » area
List of the different calibration parameters associated with the
input.
Offset : Indicates the offset value has been set
Slope : Indicates the percentage of slope has been set
Calibration button : Used to change the calibration value.
o Offset (Example pH) :
 Display the state of the sensor offset calibration
 The more the bargraph becomes red, the more the calibration limit is reached.
This information can be a sign of sensor aging.
 The offset is expressed in the unit of the physical sensor input. The min. and max.
values are different according to the sensors.
Calibration
Offset
0mV
Calibration
Slope
100%
Offset
-60mV
Dosing stop
OFF
Min:0
–
Max:200
Controlling
Dosing stop threshold
OFF
l/min