Installation Instructions

Input mode Page 49/67
Installation and starting instructions
 Recording screen
- Scale: Represents the values of the curves that are displayed. A “Zoom” can be achieved by
decreasing the high scale and increasing the low scale (See “Lateral banner” for how to modify
scale)
- Cursor: Allow you to view the different information (Value, setpoint, dosage status…) over time
by moving the cursor from left to right.
- Curves: Value in white
Setpoint in green
High alarm and low alarm in red
- Navigation button: The “Arrow” buttons allow you to move from one page to another (Active if
the number of pages is greater than 1)
 Lateral banner
Enable/Disable display of the setpoint curve (Green curve)
Enable/Disable display of the High alarm curve (Red curve)
Enable/Disable display of the Low alarm curve (Red curve)
The Enable/Disable buttons for displaying Setpoint, High alarm and Low alarm can be greyed
out if the parameter is not activated.
Scale
(Unit according to the parameter)
Cursor
Navigation button
Curves
(Value ; setpoint ; high
alarm ; low alarm)
History page 1/1