Installation Instructions

Annexes Page 63/67
Installation and starting instructions
 Reconnect the flat cable between the cards and reassemble the front panel using the 4 fixing
screws. Don’t overtighten because the screws are fixed in the plastic case.
Reconnect the flat cable and replace the front panel before switching on the power supply.
4) Installation of the auxiliary module
Before installing the auxiliary module, cut off the power supplies.
Open the transparent door and unscrew the 4 front screws using an appropriate screwdrive.
Carrefully disconnect the connection flat cable connecting the bottom card and the upper part of the
device
 Remove the button cell
 Put the new button cell