User Manual 1 Tag type 2 USB connect 3 USB port 4 Battery status 5 Tag ID 6 Scan button
Introduction This is a low frequency tag scanner that adopt wireless identification technology and it suppors reading EMID, FDX-B(ISO11784/85) etc. tag. This scanner uses high brightness OLED display which can be seen clearly in bright light environment. It can store max 128 records of tag information with its built-in memory, users can upload the information to the computer through USB cable.
Operation Turn on the device and scanning. Press scan button to turn on the device and on scanning model The tag NO. will be displayed on screen if detect a tag, display “No tag” if no tag is detected. Device could be charged and uploaded data by USB cable. When device is connected by USB,” USB” will be displayed at top left corner, and on charging status for battery status. The device is connected via wireless 2.
FCC Statement： This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
