User's Manual

Operation
Turn on the device and scanning.
Press scan button to turn on the device and on scanning
model
The tag NO. will be displayed on screen if detect a tag, display
“No tag” if no tag is detected.
Device could be charged and uploaded data by USB cable.
When device is connected by USB,” USB” will be displayed at
top left corner, and on charging status for battery status.
The device is connected via wireless 2.4G, the tag data will be
uploaded to the receiving device in real time, and the
wireless connection symbol will be displayed in the upper
right corner of the screen after inserting the receiver, as
shown in the figure:
The device is connected via Bluetooth, and the tag data will
be uploaded to the receiving device in real time. Find the
device named SYC READER on the receiving end. After the
connection is successful, the Bluetooth logo will appear in the
upper right corner of the screen, as shown in the figure:
Press scann button for 3s, data will be uploaded from the
scanner, MAX 128 records.
After uploading successfully, display as below
The data can be upload in real time if scanner is connected by
USB cable when reading a tag.
Scanner will be off after 120s without working.