Instructions

<3> <4>
Introduction of receiving and transmitting display
1
2
3
4
5
6
7
1
AF audio output display
Frequency display
3
Frequency corresponding channel display
4
Electronic volume display
5
Lock screen prompt
6
Transmitter power display
7
RF radio frequency receiving display
2
Handheld transmitter frequency description
Binding instructions for waistband transmitter
within 30cm
Screen receiving display:
Note: If the linking fails, just repeat the above operation.
Step 1: Turn on the power of the receiver and the handheld transmitter, and
find the infrared frequency window between the receiver and the handheld
transmitter. Step 2: Keep the infrared pairing window of the handheld
transmitter and the receiver in the same straight line, and the best distance is
within 30cm. Step 3: Press the IR button of the corresponding channel, the IR
window indicator flashes, and the frequency of the transmitter and receiver are
the same after the frequency is successfully linked, and the frequency linking
operation is completed.
Step 1: Turn on the power of the receiver and the waistband transmitter, and
find the infrared frequency window between the receiver and the waistband
transmitter. Step 2: Keep the infrared frequency window of the waistband
transmitter and the infrared frequency window of the receiver in the same
straight line, and the best distance is within 30cm. Step 3: Press the IR button
of the corresponding channel, the IR window indicator flashes, and the
frequency of the transmitter and receiver are the same after the frequency is
successfully linked, and the frequency linking operation is completed.
Note: If the linking fails, just repeat the above operation.
within 30cm
receiver system menu description
System Menu 1: Infrared IR Linking
Press IR to perform infrared linking
operation. At this time, the IR linking
light flashes, keep the transmitter
linking window and the receiver
linking window on the same straight
line, and keep the distance within
30cm. After the frequency operation
is successful, the working frequency
of the transmitter automatically
changes to be consistent with that of
the receiver, and the system can
work normally.
System Menu 2: Manual Frequency
Tuning Press and hold the SET
button for 2-3 seconds. At this time,
the CH channel number on the
screen flashes. Press the up and
down buttons to change the system
frequ ency. After t he ch ang e is
completed, the frequency will be
automatically locked in 3 seconds.
Then perform the infrared frequency
linking work, and the frequency
li nk i ng o pe r at io n ref er s to th e
corresponding transmitter frequency
linking operation.