User‟s guide v2 © 2009 Sygic, s.r.o. All rights reserverd.
I. Getting Started ...................................................................... 1 Using the “Main screen” ........................................................ 1 Entering an Address .............................................................. 2 Getting directions ................................................................... 5 Acquiring GPS Position ......................................................... 6 II. Planning Your Route ........................................................
End User License Agreement BY INSTALLING, COPYING OR USING ALL OR ANY PORTION OF THIS SOFTWARE YOU ACCEPT ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT. This Sygic, s.r.o. End-User License Agreement ("EULA") is a legal agreement between you (either an individual or a single entity) and Sygic, s.r.o. for the Sygic, s.r.o. product known as Sygic Mobile Maps 2009 ("Software Product"). Use of third party materials or data may be subject to other terms and conditions.
In certain countries the use of flashpost / speedcamera information might be in conflict with the law and/or regulations. By using such information user agrees to indemnify Sygic and its 3rd party suppliers of any claims related to such flashpost / speedcamera information. Usage is at own risk. MAP DATA COPYRIGHTS © 2001 – 2009 Tele Atlas. All rights reserved. This material is proprietary and the subject of copyright protection and other intellectual property rights owned or licensed to Tele Atlas.
I. Getting Started Using the “Main screen” If the menu contains more pages, you can show the next page using buttons at the bottom of the screen, or by pressing the right button on non-touchscreen devices. Back To enter the main menu, touch the map area (A) on the main screen, or press the left button on non-touchscreen devices. To enter the quick menu, touch the info panel (B), or right button on non-touchscreen devices.
Entering an Address To navigate to your destination, enter Main menu, select Navigate to... icon and then choose 2 Next, you will be asked to select Country, City, Street and House number or Street crossing. Address.
After the destination is entered, the confirmation screen is displayed: To confirm the selected destination, push the Route Me! button. If your device knows your current position, your route will be calculated immediately.
Select from map (For advanced users only) Allows you to select any starting point for your route. IMPORTANT: By default, the method of calculation is set to “Fastest”. To use a different method, see Advanced preferences. After the route is calculated, the route summary is displayed. It shows information about distance and time left to finish, estimated time of arrival and the method used (Fastest, Economic, Shortest, Pedestrian, Bicycle).
Getting directions The calculated route is displayed on the screen as a blue line.
Acquiring GPS Position In case there is no GPS signal, the screen becomes grey.
II. Planning Your Route Navigating to Points of Interest If you need to drive to a gas station, restaurant, hotel, or any other point of interest, enter the Main menu, select Navigate to... and then Point of Interest.
How to find a point of interest: Select a Group (e.g. Sports) and then select the POI type (e.g. Golf Course). If you don‟t know the group, use Show All button to get a list of all POI types. If you don‟t know the POI type, use Any button and just enter the name. You can refine the results by typing a name of the POI. It‟s not necessary to enter full name – you can just enter a part of it. NOTE: Distance shown in the list, is relative to the Area that you specified in previous step.
Navigating Home First, set your home location: Main menu > Settings > Set home location, and enter your home address. Once your home address is recorded, you can navigate home by simply selecting Main menu > Navigate to... > Home. Navigating to Your Most Recent Locations Once you have navigated to a destination, Sygic Mobile Maps makes it easy to return to the same location. There are several ways of reusing the previously selected destinations.
Stored favorite locations To view a list of your favorite locations, select Main menu > Navigate to... > Favourite NOTE: Destinations are added automatically to the list, but if you want to quickly store your current position for future use, just select Memorize position from Main menu. Memorized position will appear in the list with icon.
How to add a favorite location A Quick Menu (tap information panel on the main screen, or press right button) > Add to favourites C Store your position during navigation (Main menu > Memorize position).
Previous addresses When entering an address through Main menu > Navigate to... > Address, the list of previously selected Countries / Cities / Streets appears, as you go through the address details. They are marked with icon.
III. Changing the Route Route Details You can check the calculated route before you start driving. Enter Main menu > Route menu. Choose Show route summary > Details to get a detailed overview about the route. The blue highlighted buttons indicate that specific type of road was used.
To avoid it, tap the blue highlighted button. For nontouchscreen devices, press the Up arrow. Modifying the Route If you need to make modifications to the existing route, enter the Main menu > Alternative route. You can Compute alternative route in case you don‟t like the route calculated on the first time. Show route instructions Show route as images In case the road ahead of you is closed, you can Avoid next... few kilometers, to calculate a detour.
If you wish to cancel the calculated route completely, and use the navigation system only as an indicator of your current position, choose Main menu > Route > function. Cancel route Map Browsing Mode Checking the details directly in the map, or even planning the route can be done in map browsing mode. Select Main menu > start. Browse map to You can find additional information about modification of calculated route in the next chapter.
numeric keys, or keys # and * of your mobile device. Available options for the map: Find... You can find a position by defining it the standard ways Show current position Show entire route 16 You can select a place on the map and then enter the context menu for that point by pressing the button. Following actions are available: Navigate there Sets the new destination. Original route will be deleted. Travel via Adds a new waypoint to your existing route between start and finish.
Avoid... You can select a radius around the point, which will be avoided in the route calculation. Existing route will be recalculated. Itinerary planning If you have added some waypoints to your route via Browse map or Alternative route, you can edit them in Itinerary. It is also possible to optimize waypoints within the route, plan a new route or store it for future use. To edit the current route, open Main menu > Itinerary and select the [Current route] to see the list of waypoints.
Waypoint options If you click any waypoint of the itinerary, you get the following options: Set as visited Stops navigating to this waypoint and recalculates the route to the following one Set as finish point Puts the waypoint to the end and moves others upwards in the list You can see the starting point , the numbered waypoints and the finish . The places that you already visited are grayed out. You can add a waypoint to the itinerary by clicking the button.
Move up the selected waypoint in the list. Move down the selected waypoint in the list. Delete the waypoint.
IV. Settings To change the factory settings, go to Main menu and select Settings icon. NOTE: Buttons are displaying the situation that will occur when you push them, not the current status. E.g.: Button means that voice output and sounds are currently enabled. Pushing this button will disable the sounds.
GPS hardware: Detailed configuration of GPS and TMC hardware. Signpost settings: Sets the number of signpost tables displayed at one time and the level of detail (Full, Simplified, Single line). Preferred Other Rotate display: * Change the display orientation (landscape / portrait). Keyboard settings: * You can switch between preferred keyboard layouts using button, that is available in every keyboard. Regional settings: Set kilometers / miles, time Sygic Mobile Maps format and format of GPS coordinates.
Advanced preferences Main menu > Settings > Advanced settings 1 Avoid U-Turns Enable lane assistant Enable Autozoom Warn if Railway crossing 2 Backlight settings 3 Configuration of Information panel on the main screen 4 Notification settings of maximum speed limit 5 Safety camera settings (if your product includes this data) 22 User‟s Guide
Disclaimer The information contained in this document is the property of Sygic s.r.o. and may be used only for the purposes of operating and supporting the relevant software created by Sygic s.r.o. Sygic s.r.o. reserves all rights concerning the information contained herein. This document or any part of it may not be reproduced, distributed, or translated into other languages in any way or form except with written approval of Sygic s.r.o. This document is provided to the user on a „as is‟ basis.
