User manual

29
9. Basic Functions in the Setup Menu
a) General Information
The surveillance camera also has a comprehensive setup menu. The control lever used for
operationislocatedinthesurveillancecamera'sconnectioncable.
Different settings can be made in the setup menu.
Tocallthesetupmenu,activateasubmenuorconrmasetting,brieypushthecontrollever
(like a conventional button).
The control lever can be moved in four directions to set a function or change a setting (see label
nexttothebutton):
"L" Brieymovethecontrollevertotheleft
"R" Brieymovethecontrollevertotheright
"UP" Brieymovethecontrolleverup
"DOWN" Brieymovethecontrolleverdown
A circle symbol (" ") indicates where you are in the menu.
b) Call/Leave the Setup Menu, Save Settings
Briey push the control lever to call the setup
menu. The setup menu is displayed in the screen
image;seegureontheright.
Tosaveallsettings,select"SAVE"andthenbriey
push the control lever.
To leave the setup menu, select "EXIT" and then
brieypushthecontrollever.Thesetupmenudis-
play will then disappear from the screen.
After leaving the setup menu without saving the settings with "SAVE", they will be lost
if the power supply is disconnected or a power outage occurs!
 Therefore,do notforgetto select"SAVE"rstbeforeleaving the setupmenuand
conrmbybrieypushingthecontrollever.Thenallsettingsmadeareretainedwhen
the power fails. Then you can leave the setup menu via "EXIT".