Instructions
26
EXAMPLES – PROGRAMMING AND OPERATION
Example 1 -- EM Card Only:
Programming:
10 1 001
Read Card
#
(a) (b) (c) (d) (e)
(a) The card is programmed for operating Output 1
(b) The operation is medium EM Card only
(c) Take ID number 001 in Group 1 to store the card, which is one of the IDs in 000-999
(d) Put the card close to the reader, one beep conrms the reading
(e) Press # to store the “Card”, two-beep conrms a valid entry
Operation: (while the system is back to operation mode)
Read Card
(a)
(a) Read the EM card. Two-beep conrms the card is read and Output 1 activates
Example 2 -- Private User Code Only:
Programming:
20 2 001 1234 #
(a) (b) (c) (d) (e)
(a) The Private User Code is programmed for operating Output 2
(b) The operation medium is Private User Code only
(c) Take ID number 001 in Group 2 to store the Private User Code, which is one of the IDs in 001-100
(d) Put Private User Code “1 2 3 4” into the storage location
(e) Press # to store the “Private User Code”, two-beep conrms a valid entry
Operation: (while the system is back to operation mode)
1234 #
(a) (b)
(a) Key in the Private User Code “1 2 3 4”
(b) Conrm it with the # key. Output 2 activates
Example 3 -- EM Card + Secondary User Code:
Programming:
10 3 002
Read Card
24680 #
(a) (b) (c) (d) (e) (f)