Instructions
27
(a) The card is programmed for operating Output 1
(b) The operation medium is EM Card + Secondary User Code
(c) Take the ID number 002 in Group 1 to store the Card & Code, which is one of the IDs in 000-999
(d) Put the card close to the reader. One beep conrms the reading
(e) Put Secondary User Code “2 4 6 8 0” after reading of card
(f) Press # to store the “Card + Secondary User Code”, two-beep conrms a valid entry
Operation: (while the system is back to operation mode)
Read Card
24680 #
(a) (b) (c)
(a) Read the EM card. Two-beep conrms the reading and 30 seconds waiting time is given for entry of the User Code,
the Amber LED keeps ashing
(b) Key in the Secondary User Code “2 4 6 8 0”
(c) Conrm it with the # key. Output 1 activates
Example 4 -- EM Card + Common User Code:
Programming:
10 4 003
Read Card
#
(a) (b) (c) (d) (e)
(a) The card is programmed for operating Output 1
(b) The operation medium is “EM Card + Common User Code”
(c) Take ID number 003 in Group 1 to store the card, which is one of the IDs in 000-999
(d) Read the EM card. One beep conrms the reading. (No need to key in a Common User Code but there MUST be
a Common User Code already recorded in Location 03; (or 04, 05 for O/P 2, O/P 3).
(e) Press # to store the “Card”. Two-beep conrms a valid entry
Operation: (while the system is back to operation mode)
Read Card Common User Code
#
(a) (b) (c)
(a) Read the EM card. Two-beep conrms the reading and 30 seconds waiting time is given for entry of the Common
User Code, the Amber LED keeps ashing
(b) Key in the Common User Code “1 3 5 7” (the number programmed in “Location 0 3” for Output 1 in the previous
Example)
(c) Conrm it with the # key. Output 1 activates
Example 5 -- Delete An User Code & / or EM Card (for O/P 1, 2 or 3):
Delete An User Code or A Lost EM Card
10 5
User ID
#
(a) (b) (c) (d)