Instructions

30
(a) Visitor Code Programming, (b) The Visitor ID, (c) An One Time Code, (d) The Visitor Code, (e) Entry Conrmation
Example 2: Set a “Visitor Code” with the number of “1 3 7 8” that is valid for three hours
40 02 03 1378 #
(a) (b) (c) (d) (e)
(a) Visitor Code Programming, (b) The Visitor ID, (c) Valid for 3 Hours, (d) The Visitor Code, (e) Entry Conrmation
Example 3: Delete a “Visitor Code” from Vistor ID 02 in the memory
40 02 #
(a) (b) (c)
(a) Visitor Code Programming, (b) The Visitor ID, (c) Delete Conrmation
Example 4: Clear all “Visitor Codes” in Location 40
40 0999 #
(a) (b) (c)
(a) Visitor Code Location, (b) The Deletion Command Code, (c) Conrmation, all Visitor Codes are cleared
18. DURESS CODES (FOR OUTPUTS 1, 2 & 3) --
Locations 41, 42 & 43
Duress Codes are prepared for those Important Persons in case of DURESS while he is operating the access control
keypad. The duress code operates like a normal User Code for Output 1, 2 or 3, and at the same time activates the
Duress Output without any indication. The user may use it to report an emergency and ask for help silently when he is
forced to operate the keypad if the Duress Output is connected with a security system (for example, an Auto-dialer).
The Duress Codes are always valid. They are not governed by any inhibit or lockup function in the system.
LOCATIONS
→
CODE ID
→
DURESS CODE
→
VALIDATION
41 - 43 01 - 50
4-8 DIGITS
#
(1) (2) (3) (4)
(1) LOCATIONS
41 – Duress Codes for Output 1
42 – Duress Codes for Output 2
43 – Duress Codes for Output 3