Instructions
36
• The start and stop time gures are 24 hours basis. They are 4-digit gures from the smallest 00:00 to the largest
23:59.
• Entry of the two gure values from Small (Start) to Large (Stop) for the period of inhibition; the inhibition will start
and stop in the same day. See example (a).
• Entry of the two gure values from Large (Start) to Small (Stop) for the period of inhibition; the inhibition will start
at the time of the day; thus stop in the next day. See example (b).
• The keypad does not accept the “Start” and “Stop” times with same value. The two time gures must be different.
Clear the function of inhibition
Clear the time settings to stop the function of inhibition:
56 #
Pause the real-time inhibition manually
The real-time inhibition can be stopped temporarily if require; such as the staff work overtime in ofce. The inhibition
can be paused manually with Super User Code before or during the inhibition period. The pause is toggle and does
not affect the real time period counting.
Super User Code
# 8 ---- Inhibition paused [Inhibit LED(Red) Flashing]
Super User Code
# 8 ---- Inhibition resumes [Inhibit LED(Red) ON]
The “INHIBIT” LED(Red) is ashing during the paused period; and it is ON after inhibition resumes.
Open door lock with Super User Code at anytime
The Super User code is valid all the time even in the inhibition period. This function does not affect the real time period
counting.
Super User Code
# 1 ---- The door is open
22. PERSONAL SAFETY AND SYSTEM LOCK-UP --
Location 60
LOCATION
→
LOCK-UP OPTIONS
→
VALIDATION
60
1 to 2 Digits
#
(1) (2) (3)
(1) LOCATION
Key in Location 60