Instructions

38
24. PACIFIER TONES ON-OFF SELECTION -- Location 71
LOCATION
→
FUNCTION MODES
→
VALIDATION
71 1 or 0 #
(1) (2) (3)
(1) LOCATION
Key in Location 71
(2) FUNCTION MODES FOR PACIFIER TONES
Pacier Tone is the Beep Tones from the keypad, which include the tones of Successful Key entry (1 beep) and the
Unsuccessful User Code/Card entry (5 beeps).
The beeps for the Warning and the Power-up Delay do not belong to pacier tones and can not be OFF.
1 --- Pacier Tone ON – (Default)
All the Pacier Tones available from the keypad are enabled. They are the response tones indicating the
operation status of the keypad after a Card/User Code is entered.
0 --- Pacier Tone OFF
All the Pacier Tones are OFF. Good for place needs for a silent environment.
(3) VALIDATION
Press # key once. Two-beep conrms the entry
25. OUTPUT OPERATION ANNOUNCER -- Location 72
LOCATION
→
FUNCTION MODES
→
VALIDATION
72 0, 1 or 2 #
(1) (2) (3)
(1) LOCATION
Key in Location 72
(2) FUNCTION MODES FOR OUTPUT ANNOUNCER
Output announcer gives notication beep on the operation status of the outputs. There are two notication modes
available for the selection.The notication is also OFF while the Pacier Tone OFF mode in the Location 71 is selected.
In multi-station operation, the output announcer only goes to the keypad that has been operated but not all
the keypads in the system.
0 --- No Notication
The output operation notication is OFF but does note affect the normal pacier tones.