Instructions

39
1 --- 1 Second Long Notication -- (Default)
1 second notication beep is given when the output relay activates. It is prepared to notify the person outside the door
when the lock is released and the door can be opened. It is good for door lock that gives no sound when it activates,
such as a magnetic lock.
2 --- 2 Short Beeps Notication
2 short beeps notication is given when the output relay activates.
(3) VALIDATION
Press # key once. Two-beep conrms the entry
26. STATUS LED FLASHING ON-OFF DURING STANDBY
-- Location 73
LOCATION
→
FUNCTION MODES
→
VALIDATION
73 1 or 0 #
(1) (2) (3)
(1) LOCATION
Key in Location 73
(2) FUNCTION MODES FOR STANDBY FLASHING LIGHT
Some people nd the ashing light of the status LED (the amber LED) is annoying during standby, especially at the
night time. The standby ashing can be ON-OFF with the setting here.
1 --- Standby Flashing ON -- (Default)
The Status LED gives Standby Flashing all the time. It also gives the light indications showing the operation status
of the system.
0 --- Standby Flashing OFF
The Standby Flashing is OFF but it does not affect the system status indications.
(3) VALIDATION
Press # key once. Two-beep conrms the entry