Instructions
49
If the Master Code is forgotten, use the DAP Code to set the system into programming mode. See DAP
CODE 2828 on page 19 for the details.
2) Change The Factory Set Master Code to Owner’s Private Master Code for Security Reason
01 3289 # ---- 2 beeps, 3 2 8 9 is a Master Code for example here only.
It replaces the old master code 0000.
3) Record an “EM Card” to Operate The Output 1 for Door Open
10 1 001
READ CARD
#
(a) (b) (c) (d) (e)
(a) 10 = Programming Location for Output 1
(b) 1 = Programming option for EM Card only
(c) 001 = One of the 1,000 User IDs for the User Code/Card from 000-999
(d) Read Card = Put the Card close to the card reader
(e) # = Conrm the card is read, 2 beeps
4) Set an “User Code” to Operate The Output 1 for Door Open
10 2 002 8321 #
(a) (b) (c) (d) (e)
(a) 10 = Programming Location for Output 1
(b) 2 = Programming option for User Code only
(c) 002 = One of the 1,000 User IDs for the User Code/Card from 000-999
(d) 8321 = The User Code for door open. It is for example here only
(e) # = Conrm the User Code, 2 beeps
5) Record an “EM Card + User Code” to Operate The Output 1 for Door Open
10 3 003
READ CARD
6123 #
(a) (b) (c) (d) (e) (f)
(a) 10 = Programming Location for Output 1
(b) 3 = Programming option for EM Card + User Code. (The User Code can be repeated use or proprietary)
(c) 003 = One of the 1,000 User IDs for the User Code/Card from 000-999
(d) Read Card = Put the Card close to the card reader