Instructions
50
(e) 6123 = The User Code to be used with the EM Card. It is for example here only.
(f) # = Conrm the Card+Code is stored, 2 beeps
6) Record an “EM Card + Commom User Code” to Operate The Output 1 for Door Open
10 4 004
READ CARD
#
(a) (b) (c) (d) (e)
(a) 10 = Programming Location for Output 1
(b) 4 = Programming option for EM Card + Common User Code
(c) 004 = One of the 1,000 User IDs for the User Code/Card from 000-999
(d) Read Card = Put the Card close to the card reader
(e) # = Conrm the card is read, 2 beeps, the Common User Code goes to this User ID automatically
(f) A Common User Code (for example: 1 3 5 7) MUST be set at the Programming Location 03 rst. Common code
can be used for all the EM Cards in this operation mode.
If more User Codes and Cards are required for Output 1, repeat the procedures (3), (4), (5) or (6) above
with other User IDs, such as 005, 006, 007 --- 999 etc. Total 1,000 users are allowed. See Programming
Location 10 for the details.
7) Close The Programming Mode
* * ---- 2 beeps
The programming mode is closed. The keypad is back to normal operation mode
b) OPERATION
Open The Door with EM Card
READ CARD
--- 2 beeps, the door is open
Open The Door with User Code
8321 # --- 2 beeps, the door is open
Open The Door with EM CARD + User Code
READ CARD
6123 # --- 2 beeps, the door is open
Open The Door with EM CARD + Common User Code
READ CARD
1357 # --- 2 beeps, the door is open