Instructions

3. INTENDED USE

DK-2882 is a self-contained three output relay, vandal resistant and weatherproof keypad. It combines the digital

keypad and proximity EM card reader in one unit.

The keypad has been designed for full feature stand alone access control applications. It is expandable to work with

an optional decoder (DA-2800 or DA-2801) for high security split-decoded operation. It is also compatible with the

auxiliary card reader (AR-2802) and the auxiliary keypad readers (AR-2806, AR-2807 and AR-2809) for upgrading a

stand alone or split-decoded system to multi-station operation.

The keypad is ideally for door strike and alarm arm-disarm controls. It is also a programmable industrial timer (from 1

second to over 24 hours) for automatic operator system.

In the line of DK-2882 keypads are available for surface mount and ush mount versions.

Surface Mount / Gooseneck Mount Keypads:

DK-2882A – Output Relay 1, 2 & 3 Controlled by User Codes / Cards

DK-2882B – Output Relay 1 & 2 Controlled by User Codes / Cards; Output 3 by Bell Button

Flush Mount Keypads:

DK-2882C – Output Relay 1, 2 & 3 Controlled by User Codes / Cards

DK-2882D – Output Relay 1 & 2 Controlled by User Codes / Cards; Output 3 by Bell Button

The keypad is protected against dust and water jet according to IP66 and can be used indoors and outdoors. However

the split decoder is only for indoor use and must be protected from moisture.

For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product for purposes

other than those described above, the product may be damaged. In addition, improper use can result in short circuits,

res, electric shocks or other hazards. Read the instructions carefully and store them in a safe place. Make this

product available to third parties only together with its operating instructions.