Instructions

26
15. COMMON USER CODES FOR OUTPUT 1, 2 & 3 --
Locations 03, 04, & 05
The Common User Codes 1, 2 and 3 are prepared for operating of the Output 1, 2 and 3 respectively as an enhance
code. The Common User Codes MUST work in the form of “Card + Common Code” to operate the outputs to increase
the security of the access control system. See Media 4 at Locations 10, 20 & 30 for more information.
Common User Code alone can NOT operate the Outputs directly.
LOCATIONS
→
COMMON USER CODE
→
VALIDATION
03 - 05
4 to 8 DIGITS
#
(1) (2) (3)
(1) LOCATIONS
03 -- Location Stores The Common User Code for Output 1
04 -- Location Stores The Common User Code for Output 2
05 -- Location Stores The Common User Code for Output 3
(2) COMMON USER CODES
• The Common User Code can be 4 to 8 digits.
• When a new Common User Code is keyed in and conrmed, the old one is replaced.
(3) VALIDATION
• Pressing # key to conrm code entry.
Example:
• Set a Common User Code “1 3 5 7” for Output 1 ---- 03 1357 #
• Deleted a Common User Code from memory: Key in the Location number and #. ---- 03 #