Instructions

41
25. OUTPUT OPERATION ANNOUNCER -- Location 72
LOCATION
→
FUNCTION MODES
→
VALIDATION
72 1 or 0 #
(1) (2) (3)
(1) LOCATION
Key in Location 72
(2) FUNCTION MODES FOR OUTPUT ANNOUNCER
Output announcer gives notication beep on the operation status of the outputs. There are two notication modes
available for the selection.The notication is also OFF while the Pacier Tone OFF mode in the Location 71 is selected.
In multi-station operation, the output announcer only goes to the keypad that has been operated but not all
the keypads in the system.
0 --- No Notication
The output operation notication is OFF but does note affect the normal pacier tones.
1 --- 1 Second Long Notication -- (Default)
1 second notication beep is given when the output relay activates. It is prepared to notify the person outside
the door when the lock is released and the door can be opened. It is good for door lock that gives no sound
when it activates, such as a magnetic lock.
2 --- 2 Short Beeps Notication
2 short beeps notication is given when the output relay activates.
(3) VALIDATION
Press # key once. Two-beep conrms the entry
26. STATUS LED FLASHING ON-OFF DURING STANDBY
-- Location 73
LOCATION
→
FUNCTION MODES
→
VALIDATION
73 1 or 0 #
(1) (2) (3)
(1) LOCATION
Key in Location 73
(2) FUNCTION MODES FOR STANDBY FLASHING LIGHT
Some people nd the ashing light of the status LED (the amber LED) is annoying during standby, especially at the
night time. The standby ashing can be ON-OFF with the setting here.