Instructions

50
33. OPERATION MODES -- Location 94
The keypad is programmable for keypad mode to work stand-alone for door control directly or for server mode to work
with a split-decoder for high security access control.
LOCATION
→
OPERATION MODES
→
VALIDATION
94 0 or 1 #
(1) (2) (3)
(1) LOCATION
Key in Location 94
(2) OPERATION MODES
0 – Keypad Mode (Default)
Keypad Mode sets the keypad for stand-alone operation to provide its available functions. It is compatible with the
auxiliary readers/keypads for multi-station expansion.
1 – Server Mode
Server Mode sets the keypad to compatible with both the decoder for split-decoded operation and the auxiliary
readers/keypads for multi-station expansion. A split decoded keypad system uses the keypad(s) for human interface
outside and the internal decoder for door lock control to prevent sabotage.
(3) VALIDATION
Press # key once. Two-beep conrms the entry
The DK-2800 MK-II keypads are set in “KEYPAD MODE” in default. It is necessary to set it to “SERVER
MODE” while the keypad is in Split-Decoded operation. Here are the code entries of setting the keypad into
“SERVER MODE”
94 1 #
34. CLOSE PROGRAMMING MODE -- * *
Always close programming mode with * * to set system back to normal Operation after programming.
The button is equivalent to the * button in the keypad with bell button.
VALIDATION
* * ------------------------------- System is back to normal operation mode