User manual

69
g) Deleting recordings
When the camera images are shown on the display (real-time/normal mode), touch the arrow symbol (“ ”) in the
lower-left corner of the monitor/DVR display to access the OSD menu, and then touch the playback symbol (“ ”, see
section “H” in section 10c). Alternatively, press the “ ” button (29) on the IR remote control.
If both an SD card and a USB storage device are connected to the monitor/DVR, the active storage device
is indicated by a symbol in the upper-right corner of the display (“SD Card” or “USB”). Touch the symbol to
switch between the storage devices.
Touch the “ ” on the touchscreen, or press the “ ” button (31) on the IR remote control to cancel
the current selection and go back to the previous display.
Use the touchscreen (or the “ ” and “ ” buttons on the IR remote control) to select the desired folder. The folders
are organised by date. When using the remote control, press the “ ”(28)toconrmyourselection.
You can then select the camera (C1....C4 ) whose recording you wish to delete (provided that a recording is available).
Finally,selectthedesiredrecordingle.Thelesareorganisedchronologically,andthelesizeisdisplayed.The
menu also indicates new recordings that have not been played.
To delete the selected recording (marked in colour), touch the symbol or press the “ ” button (26) on the IR remote
control.
 Youdonotneedtoconrmthelethatyouwishtodelete.
 Todeleteanentirefolder,youwillneedtodeleteallofthelesinthefolderbeforethefoldercanbedeleted.