User manual

77
p) “Power Saving Mode” function
UsethisoptiontoconguretheLCDsleeptime.YoucanalsosettheLCDtoturnonwhenmovementisdetected
within range of the camera.
Power saving mode only affects the LCD. Camera monitoring/recordings are not affected.
Two options are displayed when you select this function. Use the touchscreen (or the arrow buttons (“ ” and “ ”)
and the “ ” button (28) on the IR remote control) to choose one of the following options:
• “Time Interval”
Use the touchscreen (or the arrow buttons (“ ” and “ ”) on the IR remote control) to select the LCD sleep time.
If you disable this function, the LCD will stay on.
To save the settings, touch the “ ” symbol on the touchscreen, or press the “ ” button (28) on the IR remote
control.
• “Wake up on motion”
Use the touchscreen (or the arrow buttons (“ ” and “ ”) on the IR remote control) to select whether the display
is automatically switched on when the camera detects movement.
To save the settings, touch the “ ” symbol on the touchscreen, or press the “ ” button (28) on the IR remote
control.
Press the “ ” button (31) on the IR remote control to cancel the setting and go back to the previous
display.
q) “About” function
Thisoptiondisplaysinformationaboutthesoftwareusedinthermware(GPLlicense).
Use the arrow symbols/buttons (“ ” or “ ”) on the touchscreen or IR remote control to scroll up or down.
Touch the “ ” symbol on the touchscreen, or press the “ ” (28) or “ ” button (31) on the IR remote
control to go back to the previous display.