User manual

13. “Record” submenu

See section 11 for instructions on how to access the main menu and the corresponding submenu.

The following functions are available:

“Scheduled Recording” Automatically record at certain times

“Motion Detection” Start a recording when movement is detected (the camera detects movement by

detecting changes in the image content)

“PIR Recording” This feature is not supported, as the wireless camera does not have a PIR sensor;

this feature is designed for another product version.

a) “Scheduled Recording” function

The monitor/DVR can be set to automatically record video at certain times of the day, e.g. at night from 00:00 to 06:00

or during the day from 08:00 to 16:00.

You can program several recording times, but the times must not overlap.

Programming/changing a recording schedule

• Whenyouselectthisoptionforthersttime,youwillbepromptedtoprogramanewschedule.Ifyouhaveprevi-

ously programmed other schedules, these will be listed on the display.

• Use the touchscreen (or the arrow buttons (“ ” and “ ”) and the “ ” button (28) on the IR remote control) to

select the desired schedule (or create a new schedule).

• When the schedule is displayed, use the touchscreen (or the arrow buttons (“ ”, “ ”, “ ” and “ ”) and the

“ ”button(28)ontheIRremotecontroltocongurethefollowingsettings:

- Choose whether to record a single camera (1, 2, 3 or 4) or all cameras

- Settherecordingtime(axeddate,workdaysonly,weekendsonly,onlyonaparticulardayoftheweek,or

every day)

- Recording start time

- Recording end time

• To save the settings, touch the “ ” symbol on the touchscreen, or press the “ ” button (28) on the IR remote

control.

Press the “ ” button (31) on the IR remote control to cancel the setting and go back to the previous

display.

Deleting a schedule

• Use the touchscreen (or the arrow buttons (“ ” or “ ”) on the IR remote control) to select the schedule that you

want to delete.

• To delete the selected schedule, touch the “ ” symbol or press the “ ” button (26) on the IR remote

control.