User manual

• Touch the “ ” icon on the touchscreen, or press the “ ” button (28) on the IR remote control to go back to the

camera selection menu. From here, you can connect another camera.

• To end the pairing process, touch the “ ” symbol on the touchscreen, or press the “ ” button (31) on the IR

remote control. The monitor/DVR will restart and will be ready for use after a few seconds.

The monitor/DVR should now display all of the connected cameras.

If pairing was unsuccessful, check whether the wireless camera is connected to the power supply.

If the wireless camera is too far away, reduce the distance between the camera and the monitor/DVR, and

then restart the pairing process.

b) “Activation” function

Use this function to disable unavailable/unused wireless cameras or channels.

• After selecting this option on the monitor/DVR, use the touchscreen (or the “ ” and “ ” arrow buttons on the IR

remote control) to select one of the four cameras.

• Use the touchscreen (or the “ ” and “ ” arrow buttons on the IR remote control) to enable/disable the selected

camera.

• Touch the “ ” icon on the touchscreen, or press the “ ” (28) on the IR remote control to save the settings and

go back to the previous menu.

Press the “ ” button (31) on the IR remote control to cancel the setting and go back to the previous

display.

c) “Image Setting” function

Usethisoptiontosettheresolutionandimagequalityforvideorecordings.Thesettingscanbeconguredindividually

for each wireless camera/channel.

 Selectingahigherresolution/imagequalityincreasesthelesizeofthevideorecording.

• After selecting this option on the monitor/DVR, use the touchscreen (or the “ ” and “ ” arrow buttons and the

“ ” button (28) on the IR remote control) to select one of the four cameras.

• Use the touchscreen (or the “ ” and “ ” arrow buttons on the IR remote control) to switch between the resolution

and video compression/video quality settings.

• Use the touchscreen (or the arrow buttons (“ ” and “ ”) and the “ ” button (28) on the IR remote control to

congurethecorrespondingsetting.Acheckmarkindicatesthecurrentsetting.

• Touch the “ ” icon on the touchscreen, or press the “ ” (28) on the IR remote control to save the settings and

go back to the previous menu.

Press the “ ” button (31) on the IR remote control to cancel the setting and go back to the previous

display.