User manual

The range is too short

• Point the monitor/DVR and wireless camera antenna in a different direction.

• Neverpointtheantennaateachother,asthissignicantlyreducestherange.

• For optimal results, the monitor/DVR and wireless camera antenna should be parallel to each other.

• Check that the wireless camera and monitor/DVR antenna are securely in place. Do not swap the antenna (the

monitor/DVR antenna is larger than the wireless camera antenna).

• Refer to section 20.

The recording is black and white.

• At night-time, the IR LEDs turn on and recordings are made in black and white.

There is no image on the LCD display.

• Switch on the monitor/DVR.

• The LCD display switched itself off to save power.

Motion detection does not function properly

• Motion detection works by detecting changes in the image content (see section 13b).

Advantages: Motion is always detected, regardless of the ambient temperature

Not affected by the temperature of the moving object

Disadvantages: May be triggered accidentally (e.g. by moving vegetation when the sensitivity setting is too high)

or by quick changes in brightness (e.g. sun/clouds)

This type of motion detection is different from devices that use a PIR sensor. PIR sensors react to a change in

temperature.

• Use a different sensitivity setting.

• Place the wireless camera in a different position.

• The objects in the detection range are moving too fast.

• Decrease the size of the surveillance range (see section 13b) to ensure that areas with trees, streets and other

moving objects are not monitored.