User manual

c) Function "PIR recording"

The screen/DVR records the camera image only when the PIR sensor recognises a temperature change in the

recording area.

The PIR sensor does not react to a pure movement, but to a temperature change in the recording area, e.g.

when a person walks into the recording area; see chapter 8.b).

• After calling the function, you can separately activate the recording for each of the four possible radio cameras (one

is enclosed, up to three more can be ordered as accessories).

• Select the desired radio camera (channel) with the control buttons " " or " "; it is highlighted in colour.

• Use the control buttons " " or " " to switch the recording on or off.

• Save the setting with the button "OK" (8); then you will leave setting mode again.

 Toleavesettingmodewithoutsavingthesettings(cancel),brieypushthebutton"MENU"(5).Thedisplay

will switch back to the prior menu.