User manual

69
f) Function "Storage for recording"
Here, the data carrier is used to save the surveillance videos can be set. The screen/DVR has both an insert for an
MicroSD/MicroSDHC memory card and via a USB connection for a USB stick or a USB hard disc.
• After calling the function, use the control buttons " " or " " to select the desired data carrier type.
• Save the selection with the button "OK" (9); then you will leave setting mode again.
 Toleavesettingmodewithoutsavingthesettings(cancel),brieypushthebutton"MENU"(6).Thedisplay
will switch back to the prior menu.
g) Function "Display items"
Thedisplayofthescreen/DVRcanshowvariousinformation,e.g.thechannelnumber.Sincethesesmallguresmay
cover important details in the image, they can be switched on and off separately. This way, you can specify whether
you want to see the information or not.
• After calling the function, use the control buttons " " or " " to select from the respective symbols to be displayed.
• Use the button "OK" (9) to switch the display of the respective icon on or off (a small check mark is displayed when
the display is on).
• The following displays/symbols are available:
"Network" Network status
"RSSI" Signal strength of the radio camera
"SD/USB status" Display of the data carrier type that is being used
"Camera" Channel number
"Battery" Charge condition display of the internal Li-Ion rechargeable battery of the screen/DVR
• Toleavesettingmode,brieypushthebutton"MENU"(6).
h) Function "TV system"
Here, the TV standard (PAL or NTSC) is used for the AV output can be set.
• After calling the function, use the control buttons " " or " " to choose between "PAL" or "NTSC".
• Save the selection with the button "OK" (9); then you will leave setting mode again.
 Toleavesettingmodewithoutsavingthesettings(cancel),brieypushthebutton"MENU"(6).Thedisplay
will switch back to the prior menu.