User manual

i) Function "System information"

• Aftercallingthefunction,thescreen/DVRshowsthermwareversionandotherinformation.

• Use the "OK" (9) button or the "MENU" (6) button to leave display mode again.

j) Function "System upgrade"

Thisfunctioncanbeusedtoupdatethermwareofthescreen/DVRandthecameras.

 Forthis,itisnecessarythatyoustorethermwareupdateonamemorycardandtheninsertitintothe

screen/DVR.

 Ifarmwareupdateisavailable,itcanbefoundinthedownloadareaonourproductwebsiteonlineunder

www.conrad.com.

• After calling the function, use the control buttons " " or " " to select the device for which you want to update the

rmware(screen/DVRorradiocameras).

• Usethebutton"OK"(9)toconrmyourselection(asmallcheckmarkisdisplayedifarmwareupdateistobe

performed).

• Tostartthermwareupdate,pushthe"REC"(18)button.Asafetypromptappears.

• Usethe"OK"(9)buttontostartthermwareupdate.Alternatively,pushthe"MENU"(6)buttontoreturntothe

previous menu (cancel).

k) Function "Scan mode period"

Use the "LOOP" (19) button to activate automatic switching between camera images (channels). The time for how

long the respective camera image is displayed can be set in this function.

• After calling the function, you can set the desired duration with the control buttons " " or " ".

• Save the selection with the button "OK" (9); then you will leave setting mode again.

 Toleavesettingmodewithoutsavingthesettings(cancel),brieypushthebutton"MENU"(6).Thedisplay

will switch back to the prior menu.

l) Function "Mute"

This function activates muting so that, e.g., the alarm sound at motion detection is temporarily deactivated without

needing to change the settings for the alarm sound.

• After calling the function, you can use the control buttons " " or " " to switch muting on or off.

• Save the selection with the button "OK" (9); then you will leave setting mode again.

 Toleavesettingmodewithoutsavingthesettings(cancel),brieypushthebutton"MENU"(6).Thedisplay

will switch back to the prior menu.