Datasheet

Data required for directional LED bulb:
File-number AR111-G53-9W/WW
Nominal-voltage (V) 12V
Nominal-power-consumption (W) 8.5W
Nominal-current-consumption (mA) 0.85A
Nominal-frequency (Hz) or DC AC50Hz
Nominal-useful-luminous flux (lm) 600lm
Nominal-lifetime (h) >20000h
Colour temperature (K) 3000-3200K
Number of switching cycles before premature lamp
failure
Lamp warm-up time to 60 % of full light output (s)
Dim / no dim
Kind of dimming: Leading edge or trailing edge NO dim
Ambient temperature (Ta in °C), if not 25 °C
45℃
Dimensions (Ø x length in mm)
φ110-H96mm
Nominal beam angle (°)
120°
Suitable for accent lighting (Y / N)
See EC regulation 1194/2012; Annex III 3.1.2 j) Y
Drawing of the lamp and of the comparing filament lamp
See EC regulation 1194/2012; 3.1.2 k)
--- Create packing department ---
Power-consumption equivalence incandescent lamp
See EC regulation 1194/2012; Annex III 3.1.2 m)
(directional lamp)
See EC regulation 244/2009 table 6 (non directional
lamp)
Rated power consumption (W) *) 9W
Rated useful luminous flux (lm) 715lm
Rated-lifetime (h) >20000h
Lamp power factor
≥0.83
Lumen maintenance factor at the end of the nominal life
Starting time (s) 0.2S
Colour rendering (Ra)
≥80
Colour consistency (cx, cy)
（0.4297,0.3997）
Rated peak intensity (cd)
Rated beam angle (°)
24/120°
Intended for use in outdoor application (Y / N) N
Intended for use in industrial application (Y / N) Y
Spectral power distribution in the range 180-800 nm
Diagram; Example see below
√
Socket G53
Energy efficiency class according 874/2012/EC
Weighted energy consumption (Ec) in kWh / 1000 h A+
Legend:
a) A ‘rated’ value means a quantity value for a characteristic of a product for operating conditions specified in this
Regulation or in applicable standards. This value is usually described in a range, e.g.: 220V – 240V AC
a）
b) A ‘nominal’ value means an approximate quantity value used to designate or identify a product.
This is usually described in specific value (not in a range), e.g.: 230V
