User manual

• Fully insert an SD card into the SD card slot SD CARD(23)untilitclicksintoplace.Observe

the correct insertion position as indicated on the product.

• ToremovetheSDcard,pressitinslightlyandthenremove.

SD cards must be clean and undamaged and should not include images from other

sources.IfyouuseSDcardsfromothercameras,rstformat(FAT32)themusingyour

computer before use in the product.

Thefollowinglesystemsarenotsupported:

NTFS,exFAT

a) Formatting an SD card

WARNING:

BeforeyouformatyourSDcard,makesuretobackupallexistingles.Formatting

erasesalllesontheSDcard.

• Set the TEST OFF CAM PSET switch to the TEST position. The LC display shows the

camera status.

• Press the M button to enter program selection mode.

• Press▲/▼buttontoselecttheformatfeature.TheLCdisplayshows“FO”and“888888”.

Press the OK button.

• Pressandholdthe▲/▼buttonssimultaneouslyuntiltheLCdisplayshows“000000”.The

SDcardhasbeenformattedandalllesontheSDcardaredeleted.

• Press the Mbuttontoleavethemenu.