User manual

12. Setting up and programming the camera
Makesurethattheproductisturnedoff(OFF position) before the using the TEST OFF CAM
PSET switch.
WhenyourstturnonthecamerawiththeswitchattheCAMposition,theLCdisplayshowsthe
camera status. The LC display may show the following indicators.
User setting
Switch position CAM
Default settings
Switch position PSET
Image recording
Image quality
Number of
multi- shots
Battery status
Date and time
PIRmode
Recordingvideo
Thiscameraallowsyoutochoosebetweenthreeoperatingmodes-cameramode,presetmode
andstandardsurveillancemode(seechapter14,“PRE-TAKE”function).
7settingslevelsareavailableincameramode:
Level1: Timeanddate
Level2: Imageorvideo
Level3: Imageresolution
Level4: Multi-shotandvideolength
Level5: Motiondetection(PIR)/Selecttimelapse
Level6: Time-outsettinginPIR/Timelapsemode
Level7: Recordingtimesettingintimelapsemode
Thecameraautomaticallyswitchestopower-savingmodeifnobuttonispressedfora
period of 5 minutes. Slide the switch to OFF and then to TESTtoactivatethecamera
again.
46