User manual

• Press the OKbuttonandthenthe▲or▼buttonstoselect“CAM”(image)or“VIDEO”.

• TheLCdisplaywillshow“CAM”or“VIDEO”dependingonyourselection.PresstheOK

buttonselectto“CAM”(image)or“VIDEO”.

Image resolution and multi-shot

• TheLCdisplayshowslevel“3”ifyouhaveselected“CAM”(imagerecording).PresstheOK

button.Thenpressthe▲or▼buttonstosettheresolution.

• TheLCdisplayashesthestaricon to indicate the image resolution selection. Press

the OK button to make the image resolution setting.

• Press▲/▼toselectanimageresolutionof12MP(3stars),8MP(2stars)or5MP(1star).

Press the OKbuttontoconrmyourselection.

• TheLCdisplayshowslevel“4”(multi-shotandvideolength).PresstheM button to exit the

menu or the OKbuttontosetthenumberofconsecutiveshots.

• TheLCdisplayshows“1P”to“10P”.InPIRmode(motiondetection),youcansetbetween

1and10consecutiveshots.Youcanthusshootupto10consecutiveshotseverytimethe

cameraistriggered.Press▲or▼toselectthenumberofconsecutiveshots.

• ThecurrentsettingforthenumberofconsecutiveshotsashesontheLCdisplay(e.g.3P).

ConrmtheselectionbypressingtheOK button.

• The LC display shows “5”. Select PIR or time lapse on this level. See section “Motion

detection(PIR)andtimelapse”.

Set length of video recording

Themaximumlengthofavideorecordingis600seconds.WhenPIRmode(motiondetection)

isactive,thecamerarecordsonlyaslongasmotionisdetectedtoconservememoryspace.

• Ifyouselect“VIDEO”onprogramminglevel“2”,theLCdisplayshows“3”.Theresolution

cannotbechangedwhenrecordingvideo(720p).Pressthe▼button.TheLCdisplayshows

“4”.PresstheOK button.

• Thenpress▲or▼toselectavideolengthbetween“005”to“600”.Thelengthofavideo

recording can be set in increments of 5 per cent of 1 minute The maximum recording time is

6 minutes. Press the OKbuttontoconrmthesetting.TheLCdisplayshows“5”forthelevel

“Motiondetectionandtimelapse”.PresstheOK button.

• Press the MbuttontoleavetheareaortheOKbuttontomakesettingsforlevel“5”.