User manual

Motion detection (PIR) and time lapse

The basic setting for time lapse mode is preset to 7 pm to 7 am the following day. If the camera is

intimelapsemode(TLS),thetimelapsesettingsapply.Ifthecameraisnotintimelapsemode,

thesettingsforPIRmodeapply.

Timelapsemodecanbeprogrammedforapresettime,suchas8pmto5am.Thensetthe

intervalsinwhichimagesarerecorded.Thecameracontinuesintimelapsemodeuntilthe

setting is manually changed or the camera is turned off.

• Navigatetolevel“5”.“PIR”and“TLS”ashontheLCdisplay.Press▲or▼toselect“PIR”

or“TLS”(timelapse).ConrmtheselectionbypressingtheOK button.

• Dependingonyourselection,theLCdisplayashes“T-OPIR”(time-out)or“T-OTLS”and

level“6”.PresstheOK button to set the time-out period.

• TheminutesashontheLCdisplay.InPIRmode,time-outcanbesetbetween5seconds

and60minutes.Intimelapsemode,time-outcanbesetbetween5secondsand10minutes.

Press▲/▼toselecttheminutes.PresstheOKbuttontoconrmyourselection.

• ThesecondsashontheLCdisplay.Press▲/▼toselecttheseconds.PresstheOK

buttontoconrmyourselection.

• IfyouhaveselectedTLS(timelapse),“TLS”ashesaswellas“S-19:00”(S=start,19:00=

time in HH:MM). Press the OK button to set the starting time.

• Thehoursashonthedisplay.Press▲/▼tosetthehoursbetween0to23inincrements

of 1 hour. Press the OKbuttontoconrmyourselection.

• The minutes ash on the LC display. Press ▲ / ▼ to set the minutes from 0 to 59 in

increments of 1 minute. Press the OKbuttontoconrmyourselection.