User manual

• TheLCdisplayashes“E-7:00”(E=end,07:00=timeinHH:MM).Followtheprevioussteps

to set the hours and minutes for the end of the recording time.

• Press the Mbuttontoleavethemenu.

• Set the TEST OFF CAM PSET switch to OFF to end programming.

• Set the TEST OFF CAM PSET switch to CAM toactivatethecamerafortheprogrammed

recording mode.

Examples and recommendations for time lapse mode

Example 1:

Time lapse mode has been programmed with a start time of 7:00 am and an end time of 8:30

pm with a time-out period of 3 minutes and multi-shot of 3 images. This means that the camera

shoots3imagesevery3minutesbetween7:00amand8:30pm.

Example 2:

Time lapse mode has been programmed with a start time of 00:00 and an end time of 00:00 with

a time-out period of 5 minutes and multi-shot of 3 images. This means that the camera shoots

3imagesevery5minutesthroughouttheday.

To ensure a long battery life and many still images, the following is highly

recommended:

Batteries:Usehigh-qualityalkalinebatteries(typeC)

Imageresolution:5MP(1star),time-outperiod:30or60seconds

13. Setting up the camera for eld trips

Youmayuseyourcameraoutdoorsoroneldtripsonceyouhavesetupallitsprogramming

settings. Here are some useful tips.

• Mount the camera at a height of approximately 1.5 to 2 m. The camera should point slightly

downwards.Thebatterycompartmentcovermustpointupwards.

• Mountthecamerafacingnorthorsouth.Ifpossible,thecamerashouldnotfaceeastorwest

astherisingandsettingofthesunmayinadvertentlytriggeritandresultinoverexposed

images.