User manual
51
Proceed as follows for programming:
1. After selecting this function G2 “PROGRAM SETTING” and
conrming with “OK” (2), the number(s) for the weekdays or
day blocks ash at the upper display edge.
2. Select one of the individual days or one of the day blocks with
the buttons “–” (5) and “+” (6).
“1” = Monday
“2” = Tuesday
“3” = Wednesday
“4” = Thursday
“5” = Friday
“6” = Saturday
“7” = Sunday
“1 2 3 4 5” = Monday through Friday
“6 7” = Saturday and Sunday
“1 2 3 4 5 6 7” = Monday through Sunday
3. When the desired weekday or block ashes in the display,
push “OK” (2).
4.
The time display at the top right starts to ash (if no time is pro-
grammed yet, there will be a ashing display „- - : - -“). In addition
to the time display, the number of the memory stop is displayed
(P1.....P7).
5. Set the time from which onwards the temperature is to apply
with the buttons “–” (5) and “+” (6) (steps of 10 minutes), e.g.
06:00. Keep the respective button pushed for quick adjust-
ment.
6. Push the “OK” button (2). “SET AT” ashes at the upper right
of the display, and below it, the temperature value ashes
(“SET AT” means “set to...”).
7. Set the desired temperature value with the buttons “–” (5)
and “+” (6), e.g. 20.0 °C. Keep the respective button pushed
for quick adjustment.
8. Press the “OK” button (2).
9. Repeat steps 4 to 8 for the next times. If you set “- - : - -” for the
time (between 23:50 and 0:00 hours), the setting of time/
temperature is terminated and the universal thermostat is
back to programme step 1.