User manual

55
e) Function G5 “CLOCK SETTINGS”
You may switch the time display between 12h and 24h mode here
and set the date and time.
Proceed as follows:
1. After selecting this function G5 “CLOCK SETTINGS” and
conrming with “OK” (2), the display “12H” or “24H” ashes.
2. Select 12h or 24h mode with the buttons “–” (5) and “+” (6).
In 12h-mode, “AM” is displayed to the behind the time in the
rst half of the day, “PM” in the second.
3. Conrm the selection with ”OK” (2). The year now ashes in
the display (display “YEAR” at the bottom of the display).
4. Set the year with the buttons “–” (5) or “+” (6) (for quick
adjustment, keep the respective button pushed). Briey push
the button “–” (5) once when the display shows “0000”.
5. Conrm the setting with “OK” (2). The month now ashes in
the display (display “MONTH” at the bottom of the display).
6. Set the month with the buttons “–” (5) or “+” (6) (for quick
adjustment, keep the respective button pushed).
7. Conrm the setting with “OK” (2). The date now ashes in the
display (display “DAY” at the bottom of the display).
8. Set the date with the buttons “–” (5) or “+” (6) (for quick
adjustment, keep the respective button pushed).
9. Conrm the setting with “OK” (2). The hours of the time ash
in the display (display “HOUR” at the bottom of the display).
10. Set the hours with the buttons “–” (5) or “+” (6) (for quick
adjustment, keep the respective button pushed).
11. Conrm the setting with “OK” (2). The hours of the time ash
in the display (display “MIN” at the bottom of the display).
12. Set the minutes with the buttons “–” (5) or “+” (6) (for quick
adjustment, keep the respective button pushed).
13. Conrm the setting with “OK” (2).
The universal thermostat is then in the previous menu for se- The universal thermostat is then in the previous menu for se-The universal thermostat is then in the previous menu for se-
lection of functions again.
To leave the menu and return to the regular display, push the
button “MENU” (3), repeatedly if required.