User manual

68
e) Function H5 “RESET ALL”
This resets the universal thermostat to factory settings.
All settings and programmings are lost irrevocably.
Then proceed as described in the chapters above for
programming.
Proceed as follows:
1. After selecting this function H5 “RESET ALL” and conrming
with “OK” (2), either “YES” or “NO” ashes.
2. Use the buttons “ – ” (5) and “ + ” (6) to select:
“YES” = Perform reset
“NO” = Cancel
3. Conrm the selection with “OK” (2).
When selecting “YES”, all settings are reset to factory
settings. This takes a few seconds (all buttons are without
function during this).
The universal thermostat is then in the previous menu for
selection of functions again.
To leave the menu and return to the regular display, push the
button “MENU” (3), repeatedly if required.