User manual

Use the Normally Open (N.O.) output contact to shunt a Normally Closed (N.C.) protection zone of an alarm

system.

Set output contact to Start / Stop Mode (Programming Option 52, Output Mode=0).

Use the (N.O.) or (N.C.) output contact to make arm-disarm control of an alarm system.

Consult your alarm control panel manual for the appropriate output contact to be used in arm-disarm control.

Usually set output 2 to Momentary mode (Programming Option 521, Location 52, Output Mode=1) for multi

station systems and Start / Stop mode (Programming Option 520, Location 52, Output Mode=0) for single

station systems.

(F) OUTPUT 2 OR OUTPUT 3

( i ) Shunting an N.C. Zone

( ii ) Alarm System Arm-Disarm Control

Example:

User Name Location Function Code User ID PIN/Code Card # Remark

1,000

RECORD A MASTER CODE --For Both Master & Slave Keypads (Location 01)

MASTER CODE

Master Code is the authorization code for setting the system to programming mode. It is NOT an User Code

operating of the output relays.

The Master Code can be 4 to 8 digits. Press # key to confirm code entry

When a new master code is keyed in and confirmed, the old master code is replaced automatically.

The master code is also the Link-up Code between the keypad and the controller of the system in Split-decoded

operation. Master and Slave Keypads are required to set with the same Master Code.

Example: Set a Master Code with the number of “2 2 3 3” ----

RECORD A SUPER USER PIN (Location 02)

The Super User PIN has TWO functions. It is prepared for the owner to simply use only one User PIN to operate the

three outputs of the keypad and make operation inhibit enable / disable to the system outputs.

SUPER USER PIN

The Super User PIN can be 4 to 8 digits.

Two beeps will be heard after pressing the # key to confirm code entry.

When a new Super User PIN is keyed in and confirmed, the old one is replaced.

Example: Set a Super User PIN with the number of “2 5 8 0” ----

To deleted a Super User PIN from memory: Key in just the Location number and #. ----

4 to 8 Digits

SUPER USER PIN VALIDATIONLOCATION

2580

4 to 8 Digits

MASTER CODE VALIDATIONLOCATION

2233

INDIVIDUAL