User Manual

La marque de technique domestique pour toute la maison. Davantage d‘informations sur www.sygonix.com

5. Explication des LED d’état

A) LED rouge/orange

S’allume en rouge pendant que la serrure co-

dée fonctionne.

S’allume en orange si la serrure codée se

trouve en mode de programmation.

B) LED vert

S’allume en vert si le mot de passe utilisateur

a été saisi correctement. Clignote en vert pour

le rappel «Door Lock» (la porte est ouverte plus

longtemps que le réglage de la minuterie des

contacts de relais «LOCK OUT»).

C) LED jaune

S’allume en jaune pendant que les contacts

relais «AUX OUT» sont activés.

To activate automatic key lock after 5 wrong code entries, enter the fol-

lowing combination::

✱ 53 1 #

To activate the automatic key lock after the 20 wrong characters were en-

tered in sequence, enter the following combination:

✱ 53 0.00 kg

h) Setting the AUX-OUT activation code

To be able to activate the “AUX OUT “ relay contacts, set an activation code

ﬁ rst. An AUX-OUT activation code is not programmed in the factory. To set

the activation code for AUX OUT, enter the following combination:

✱ 40 CODE # CODE = activation code (4 - 8 digits)

i) Determine AUX-OUT activation duration (factory settings = 30 sec.)

To set the activation time after the activation code was entered success-

fully, enter the following combination:

✱ 58 TTT # TTT = 001 - 999 (seconds)

TTT = 000 (LOCK-OUT remains activated

until the activation code is entered again)

j) Setting the AUX OUT trigger mode

Factory setting = the “AUX OUT” relay contacts were activated using

the activation code.

You can activate the relay contacts in different ways. For this purpose, this

code lock offers you convenient options to specify an activation mode. To

set the required activation mode, please enter the following combination:

✱ 57 C # C in this case stands for the desired mode

type.