User manual

Operating elements
a) Dehumidier
1
2
3
4
5
6
7 8
9
10
b) Water tank
1
2
3
4
5
6
7 8
9
10
c) Control panel
18 19
20
21
11121314151617
Button /
LED
LED colour Function
FULL red Full water tank warning
POWER green On/off switch
SETTING green Setting the desired air humidity level
TIMER green Programming the power-on or power-off time
SPEED
LED
11121314151617
18 19 20 21
: green
LED
11121314151617
18 19 20 21
: red
Setting the fan speed
Operation
a) Setting up and connecting
Leave a distance of at least 20 cm between the device and any walls, furniture, etc.
The dehumidier may only be operated on a dry, even and secure surface to prevent
tipping or rolling away.
Use the handle (2) and the wheels (7) to move the dehumidier.
• Connect the power plug (8) to a common household power outlet. The product emits a beep.
The LED POWER (12) lights up. The product is in standby mode. The display (14) shows
the current humidity.
b) Switching on/off
• Press the button POWER (21) to turn on the product. The product emits a beep and begins
dehumidifying via the air outlet grid (1).
• After use, reactivate standby mode by pressing the POWER button again. All operating LEDs
except for the POWER LED go out. The display continues showing the current humidity.
• Disconnect the power plug from the power outlet to turn off the product completely. The
POWER LED and the display go out.
c) Setting the fan speed
• Press the SPEED button (18) to select one of two levels. The respective LED lights up.
•
11121314151617
18 19 20 21
SPEED LED (16): low fan speed
•
11121314151617
18 19 20 21
SPEED LED (17): high fan speed
Depending on the setting, one of the two SPEED LEDs lights up when the device
turns on. This also applies if you previously unplugged the power plug from the
mains socket.
d) Setting the air humidity level
• Press the SETTING button (20) to set the air humidity level within a range of 40 to 80 % and
in increments of 5 %.
• The desired humidity ashes on the display and the SETTING LED (13) lights up briey. The
display then shows the current humidity again.
When the current ambient humidity drops below a value of 35 %, the display will
show “35”.
When the current ambient humidity exceeds a value of 95 %, the display will show
“95”.
e) Using the timer
Programming the power-on time
• The product must be in standby mode to use this function.
• Press the TIMER button (19) to set the time within a range of 1 to 24 hours and in increments
of 1 hour. The LED TIMER (15) lights up. The display will show the set value.
• If you select a value of “10” hours, the product will turn on automatically after 10 hours.
• To disable the automatic power-up feature, rst turn on the product either via the POWER
button or by setting the timer to “00”.
Programming the power-off time
• In order to use this function, the product must be switched on.
• Press the TIMER button to set the time within a range of 1 to 24 hours and in increments of
1 hour. The LED TIMER lights up. The display will show the set value.
• If you select a value of “10” hours, the product will turn off automatically after 10 hours.
• To disable the automatic power-down feature, rst turn on standby mode either via the
POWER button or by setting the timer to “00”.
The programmed time is kept in case operation is interrupted via the automatic
defrost feature or a full water tank.
11 LED FULL
12 LED POWER
13 LED SETTING
14 Display
15 LED TIMER
16 LED
11121314151617
18 19 20 21
SPEED
17 LED
11121314151617
18 19 20 21
SPEED
18 SPEED button
19 TIMER button
20 SETTING button
21 POWER button
1 Air outlet grid
2 Handle
3 Control panel
4 Air lter frame
9 Float
10 Front recess for power cable or
drain hose
5 Air intake grid
6 Water tank (removable)
7 Wheels (4 x)
8 Mains cable with mains
plug