User manual

8. Installation of the foot

• Place the product upside down.

Use a soft surface to protect the casing from scratches or other damage.

• Attach both feet with 4 screws each on the bottom of the product. Use a Phillips screwdriver.

The black plastic feet must be at the bottom when the product is in a normal, upright position.

9. Charging the internal rechargeable battery

• Makesurethatthechargingswitch(5)isinthe“off”position.

Off On

• Connect the power cord to the power cord connection (6) and a standard household power outlet.

• Setthechargingswitchto“on”position.TheredLEDontheswitchlightsup.Theinternalbatterywillbecharged.

• Chargethe batterybefore rstusefor 3.5hours. Once thebattery ischarged,set thecharging switchto“off”

position. The red LED goes out.

When the battery is charged, you can operate the product without the power cord.