User manual

10. Inserting/replacing batteries (remote control)

• Remove the battery compartment lid from the back of the remote control.

• Insert 2 AAA batteries and heed correct polarity. Heed correct polarity as indicated in the battery compartment.

• Close the battery compartment.

Change the batteries when the product no longer responds to commands from the remote control.

Aim the IR transmitter (10) always directly at the IR receiver (17).

Ensure that the IR receiver is not obstructed.

Place the remote control in the storage compartment (1), when you do not use it.

11. Operation

• Press the on/off switch (12, 13), to turn on the product. All 5 fans are operating. All 3 LED indicators (16) are lit

green.

• Press the oscillation button (9, 15) to oscillate the product. Press the button again to stop the oscillation.

• Press the power level button (11, 14) to determine the number of active fans.

Power setting Active fans LED indicators

I 2 The bottom LED indicator lights up.

II 3 The two bottom LED indicators light up.

III 5 All 3 LED indicators light up.