User manual

20
1 Button (switching auto/manual)
2 Button
(heating level II)
3 Button
(heating level I)
4 Button
(temperature down)
5 Button
(temperature up)
6 Display
(frost protection mode)
7 Display
(heating level display)
8 Display
(manual operation)
9 Display
(automatic operation)
10 Temperature display (2-digit)
11 Air outlet (top)
12 Wall mount, top (with handle)
13 Mode indicator
14 Keypad
15 On/off switch
16 Wall bracket, bottom (on both sides)
17 Air inlet (bottom)
18 2 x foot with castors (only Order no. 1524062)
Installation accessories
• Wall mount
• 4 x dowel
• 2 x long screw
• 2 x short screw
8. Installation
Make sure that the device is turned off before it is connected to the mains socket. The on/off switch (15)
must be at position O.
Thedevicemustbeatleast70cmfromthegroundandxedtothewall.Noobjectssuchasashelfmay
be located within 1 m above the device.
Combustibleorammablematerialssuchascurtainsorotherdecorativefabricsmustbekeptatleast
1 m from the front, bottom, top and sides of the device.
a) Attach stand with castors (only order. no. 1524062)
• Slide the two supplied stands at the grooves on the
bottomofthedevicetoattach.Makesurethestandst
correctly when attaching them.
It is recommended to slide the stands onto the
grooves from above. This makes attaching
them a little easier. To do so, place the device
with the side facing down.
• Removethestandsintheoppositedirectionifyouwant
to mount the device on a wall.