User manual

Conguring A Sensor
Note that sensors that do not allow for
parameter adjustment are not listed in the
sensor conguration panel.
1. Go to the app landing page.
2. Touch
if it is not already selected.
3. Select the gateway from the device list.
4. Touch Alert Mode.
5. Select a sensor and edit its congurations:
Enable
Sensor
Disable and enable the sensor
Ring tone
Select the sound to be played
when the sensor is triggered.
Select 'No ring' for no sound.
Light
If you want the see a notication
light on the gateway when the
sensor is triggered enable Light,
else disable it.
Set the colour and brightness of
the notication light.
6. Touch Save to save the congurations.
7. Touch Save again to save the
congurations under the Alert mode.