User manual

d) "VIDEO SETTING" submenu

All functions that are used to adjust the picture adjustment are gathered here.

"CONTRAST": Contrast

"SHARPNESS": Image sharpness

"COLOR GAIN": Colour saturation

"DNR": Noise suppression

"TRANSFER MODE": Select video output signal of the surveillance camera ("AHD" = "Analogue

HighDenition"=HDvideosignal,"CVBS"=standardanaloguevideosignal,"CVI"="Compos-

ite Video Interface", "TVI" = "Transport Video Interface")

In "CVBS" mode the surveillance camera provides a standard analogue video signal,

which can be displayed on almost every traditional surveillance monitor and can be

recorded on appropriate DVRs.

In the "AHD", "CVI" and "TVI" operating modes, the surveillance camera provides

a high-resolution video signal that gives a much better image quality than "CVBS".

However, you need a special DVR to be able to watch and record this high-resolution

video signal.

"FORMAT": Switching between PAL and NTSC

"DWDR":Dynamicrangefunction;brighteningofdarkareasindifcultambientconditions

"RETURN" = exit submenu and return to the previous menu

e) "LANGUAGE" submenu

This is where you can set the language for the OSD menu.

f) "RESET" submenu

Toresetallsettingstothefactorydefaultsettings,selectthissubmenuandthenconrmyour

selection.

g) "SAVE-EXIT" submenu

Once you have adjusted the OSD menu settings, you can save them here. The OSD menu is

then automatically exited.