User manual

13 Temperature and humidity sensor (#1597119)

13.1 Intended use

Use the Gateway (#1597115) to control and receive data from the sensor. The sensor is controlled through the mobile

app. Operate the product indoors only.

Use the sensor to measure temperature and humidity to be transmitted to the mobile app.

13.2 Prerequisites

• Sygonix Home Mobile App

• Gateway (#1597115)

• IEEE 802.11 WiFi network

13.3 Delivery contents

• Base

• 2x Screw

• 2x AA battery

• Safety sheet

13.4 Operating elements

Pairing button

Indicator light

13.5 Install batteries

• If an insulation strip is visible after unpacking a sensor, pull the strip to activate the battery(ies). In this case battery

installation is not necessary.

• Observe the battery polarity as indicated in battery compartment/housing/diagram.

• If the sensor no longer reacts, replace the battery(ies).